Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These kits are really thick and have a great fitting hood.
These kits are really thick and have a great fitting hood. The rule of thumb is to measure twice, cut once and cut long. You can always trim more off. You should mount the fenders and the front hood before cutting, this will give you an idea where to start. Kits come with wide fenders or narrow fenders. A narrow fender is just like the wide but with the outer lip cut off. Hoods and kits have to be shipped by truck.
Off-Road: All
No customer reviews for the moment.
Part #: 2847521A
This seal goes on the body of the bus, that the safari window closes against.
Application:Part #: 111899115
Body Pad (2), Lower, Body to Front Beam
Application:Part #: 251813226A
This seal goes between the body and the engine.
Application:Part #: 141853901B
Body Emblem, Convertible
Application:Part #: 111905271A
36 HP Distributor Vacuum Advance Unit
Application:Part #: 1415057
EMPI Polished Billet Aluminum Steering Wheel Boss Kit
Application:Part #: 211857723BK
This hook goes on the quarter post to hang you shoulder belt on while not in use.
Application:Part #: N154011
These nuts and washers hold the heads on.
Application:Part #: 111701433
Battery Clamp For 12 volt applications
Application:Part #: 241853347
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 151837633A
Vent Wind Upper Pivot Screw, Convertible
Application:Part #: 133971022
The electrical harness runs everything on the car.
Application:Part #: 113853505H
This is the front strip that goes down the front hood.
Application:Part #: 111209147A
This tube like screen is located in the bottom of the gas tank.
Application:Part #: 211941531E
This switch turns on the headlights, as well as, dims the dash lights.
Application:Part #: 113863505B
This is the replacement cardboard liner for under the front hood.
Application:
These kits are really thick and have a great fitting hood.