Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bus (Type 2): 68-79
Type 3: 68-73
No customer reviews for the moment.
Part #: 131405666
Spindle Nut, Left
Application:Part #: 111827025AE
This is the lid that covers the engine.
Application:Part #: 131853535
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 2847105A
This popout window kit is a vintage style assembly replacement for the 68-79 double cab rear passenger window.
Application:Part #: 211611761
Master Cylinder to Pressure Regulator Brake Line
Application:Part #: 1601063CAP
Replacement Center Cap for EMPI 4 Spoke Rims
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 2711099PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 111941515D
Dash Switch Threaded 14mm Nut, Each
Application:Part #: 151863014
These are the interior panels.
Application:Part #: 131711141BK
This is the knob on top of the shifter..
Application:Part #: 6517283091
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 211707335C
Bumper Bracket, Left, Rear
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
