Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the front door handles.
These are the front door handles. They come with keys. To get your old one off peel back the rubber around the door latch and you should see a phillips head screw(s). Remove the screw(s) and push the handle back towards the front of the car and it will fall off. On buses 1964-1967 you will need to pull off the door panel and use an allen wrench to remove the handle.
Bug (Type 1): 56-59
No customer reviews for the moment.
Part #: 1615109SWG
This kit allows you to run disc brakes in the rear.
Application:Part #: 1405671
These aluminum nuts are fashioned after the ball joint style nut.
Application:Part #: 111899123A
This is a little rubber pad that goes on the front beam where you attach the beam to the body.
Application:Part #: 113129027
This is what delivers gas and air to the engine.
Application:Part #: 111401315
Torsion Arm Bushing, 8 Per Car
Application:Part #: 113698273
This kit is for rebuilding the wheel cylinder.
Application:Part #: 181405361A
These joints are located in the ends of the control arms.
Application:Part #: 113127025G
These stock pumps pump fuel into the carburetor.
Application:Part #: 113101353BCO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 6411107A
Thru Rod 8" Wider Beam, 48.75" Long, Boxed
Application:Part #: 1615112
Rear Disc Brake Kit With E-Brake, 5x130 w/ 14x1.5mm threads or 5x4.75" w/ 12mm threads, IRS
Application:Part #: 261827600
Gas Door Hardware Kit
Application:Part #: 1251211
These are two of the different types of exhaust nuts.
Application:Part #: 6501229AE
These are hardened aircraft quality CV joint bolts.
Application:
These are the front door handles.