Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
These locks keep the vent wing closed, therefore a must, but they're a pain to replace. Start by removing the glass and rubber. Use a 1/8" drill and drill out the original rivets. Next, remove whatever is left of the old lock and install the new lock. Using 1/8" pop rivets, install the head of the lock from the frame side. With a hammer and dolly, very carefully flatten what's left of the rivet on the latch side. Now replace the glass and rubber.
Bug (Type 1): 68-79
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 131885665
Rear Seat Release Strap, Clear
Application:Part #: 6885401BK
Rear Fiberglass Buggy Seat 37 3/4" Black Diamond Stitch Cover
Application:Part #: 211703651
Rear Apron Mount Bracket, Left
Application:Part #: 311611701B
This flex hose goes from the metal brake line to the front wheel cylinder. m/f 335mm
Application:Part #: 6905821
Sealed Momentary Push Button Starter Switch
Application:Part #: 025121403
This tank is part of the cooling system..
Application:Part #: 211415417
This is a rubber "donut" that connects the steering shaft to the steering box.
Application:Part #: 2101309CU
Barrel Shims T4 Custom Size
Application:Part #: 1611701A
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 131721551
This flex tube goes from the floor pan to the throttle tube on the back side of the fan shroud.
Application:Part #: 111109345
Push Rod tube seal for 36 HP
Application:Part #: 141881377
This is the padding that sits on top of the springs of the seat.
Application:Part #: 1129611EL
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 141955517A
This switch controls the wiper motor.
Application:Part #: 2847101SS
This makes the rear window pop out like the front windows.
Application:Part #: NGK B6HS
When replacing these use anti-seize on the threads. NGK B6HS is direct swap for this Bosch W7AC Plug
Application:
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.