Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt..
If you are prone to stick your finger where they don't belong or have kids that do, it's a good idea to put a guard around the belt.
Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 043119351B
Heater Channel Tin Left
Application:Part #: N107101BSS
6mm Allen Head Tin Screws Stainless Steel
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 6119027
This fan shroud is small in size allowing more room around other parts of the engine.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 113119317
These are also known as the "forget-me-nots".
Application:Part #: 6119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application: