Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is stainless steel braided fuel line.
This is stainless steel braided fuel line. We do not recommend this line unless you are using the screw in fittings everywhere. Don't use clamps because they're too loose and might come off. The hose size is 6AN.
Bug (Type 1): For adding fuel pressure gauge
Type 3: For adding fuel pressure gauge
Ghia: For adding fuel pressure gauge
Thing: For adding fuel pressure gauge
Race/Offroad: For adding fuel pressure gauge
No customer reviews for the moment.
Part #: 1127101ALM
This is stainless steel braided fuel line.
Application:Part #: 1129610EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127106ALM
This is stainless steel braided fuel line.
Application:Part #: 111127511A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1127022
This block off is used in conjunction with electric fuel pumps and mounts in place of the manual fuel pump.
Application:Part #: N138211
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 1129700
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1127101
Hose Clamp For 7mm Hose
Application:Part #: 1129717
These gaskets are for upright dual port engines.
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 111127541
8mm Fuel Line Union Nut
Application:Part #: 1129617
This air cleaner is a sealed unit; the top and bottom do not come off, but they're washable.
Application:Part #: 1129605
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 111198555
This kit allows you to rebuild your square top or 40hp fuel pump.
Application:Part #: 043129707
Intake Manifold Block
Application:
This is stainless steel braided fuel line.
