Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam. They allow the spindle to move up and down. The only way you can check yours is to tear them out of the spindle. Once you have them out look for pits in the pin, outer race and bearing. Count your shims and make sure you have 8 per pin. The reason you don't see 1963 listed is on a 63 it is one or the other. 1955-1962 is a 20mm pin and 1964-1967 is a 22mm pin. You will also see here good used parts as well. Please call or email for availibilty.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 211941361
Back up Light Assembly Seal, fits both sides, each
Application:Part #: 113943191
This is the lens and seal for the light that shines on the license plate.
Application:Part #: 151837476D
The front door window rolls up and down between these two rubber seals.
Application:Part #: 151863702
This is a full carpet kit.
Application:Part #: 113837225WW
Inner Door Handle, Chrome
Application:Part #: 143867121
Black Plastic Inside Door Covers
Application:Part #: 113012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 113798054R
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 211611301S
Brake fluid reservoir
Application:Part #: 211711199
Rear Shift Rod bushing.
Application:Bus (Type 2); 50-58 vin 306725
Part #: 1129026
34 Pict Carburetor spacer plate, measures 3/8" thick with 2 11/16" hole to hole
Application:Part #: 6801211
These tabs are used for mounting just about anything to tubing..
Application:Part #: 1115457BL
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Blue
Application:Part #: 1129627
CB 650 Dual Valve Springs (Set)
Application:Part #: 211971225C
This cable goes from the battery to the starter.
Application:Part #: 111821305L
These are new rear fenders.
Application:
