Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam. They allow the spindle to move up and down. The only way you can check yours is to tear them out of the spindle. Once you have them out look for pits in the pin, outer race and bearing. Count your shims and make sure you have 8 per pin. The reason you don't see 1963 listed is on a 63 it is one or the other. 1955-1962 is a 20mm pin and 1964-1967 is a 22mm pin. You will also see here good used parts as well. Please call or email for availibilty.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 6821305N
These kits are really thick and have a great fitting hood.
Application:Part #: 1885404CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113881478C
These are the cover plates that go on the bottom of the seat frame..
Application:Part #: N133281
Heater Knob Roll Pin
Application:Part #: 1405361
These ball joints have more travel in them than stock ball joints.
Application:Part #: 6701040
3" Body Lift Kit for Bajas and Buggies Shipped by Freight only or Will call pick up!
Application:Part #: 6801198
Threaded bung, 3/4"-16 LH, 1"x.120, 2 3/8" Long
Application:Part #: 111899119B
Body Pad (2), Rear Shock Tower
Application:Part #: 021105285
Endplay Shim .34mm
Application:Part #: 211953165C
This seals the front turn signal housing from the fender.
Application:Part #: 111827025AD
This is the lid that covers the engine.
Application:Part #: 211947107AWW
Dome Light Bulb Holder
Application:Part #: 00012BRU
12 coil
Application:Part #: 311611015JGR
This hydraulic cylinder feeds all the wheel cylinders.
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: JC44490
Jaycee Billet IDA Stacks, Polished, Each
Application: