Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are a nice unit and much better for off road cars than the cast aluminum breather box.
These are a nice unit and much better for off road cars than the cast aluminum breather box. Great for sand cars.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: N122412
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 6117004
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 113198031
These gaskets are used on the sump plates of the engine.
Application:Part #: 1115351
This is the last oil filter you will ever buy.
Application:Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111115131B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111117021ERB
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:
These are a nice unit and much better for off road cars than the cast aluminum breather box.
