Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These flywheels have been reconditioned and are sold on an exchange basis.
These flywheels have been reconditioned and are sold on an exchange basis. If your flywheel has a groove where the clutch rides, it's a good idea to replace it. Read CRANKSHAFT ENDPLAY SHIMS for important instructions on flywheel installation.
Bug (Type 1): 36hp
Bus (Type 2): 36hp
Ghia: 36hp
No customer reviews for the moment.
Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113105245FS
This seal goes behind the flywheel.
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: JC86050
Jaycee Billet 7" Crank Pulley for Street Cars, Black
Application:Part #: 111105285
Flywheel Shim 25-36HP, .32mm (0.0125")
Application:Part #: 111105401RC
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 111105281
Flywheel Shim 25-36HP, .24mm (0.01")
Application:Part #: 1105257
This is a billet, zinc plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 111105223
This brass gear goes on the crank to turn the distributor drive shaft.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 113105209
This is a steel gear that goes on the crank to turn the cam.
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105277
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 1105253BL
This is a crank pulley for an upright motor.
Application:
These flywheels have been reconditioned and are sold on an exchange basis.
