Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This is the belt that turns the generator. We found German belts are the only belts with the correct width. Wider belts tend to ruin the generator pulley. Note: See GENERATOR PULLEY for instructions. Make sure you always carry a spare belt and the tools to change it.
Bus (Type 2): 72-79
No customer reviews for the moment.
Part #: 111119131
Fan Hub Washer
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 30048
This little box tells the Alternator what to do.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: JC86000
Jaycee Billet Alternator Pulley, Blue
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 113903141B
The generator strap goes around the generator and holds the generator to the stand..
Application:Part #: GR15XCO
Core Charge Generators supply the battery with voltage. Rebuilt
Application:Part #: 1903109CH
This is a stock generator pulley that has been chromed.
Application:Part #: SR17XCO
This is what starts the car.
Application:Part #: 111903221A
These are the bearings and brushes for your generator.
Application:Part #: GR17X
Generators supply the battery with voltage.
Application:Part #: SR11XCO
This is what starts the car.
Application:Part #: 113971901A
This boot goes over the wire and the terminal of the generator or alternator.
Application:Part #: AL82NC
This unit supplies the battery with voltage.
Application: