Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the three pieces of tin that go on the back of the generator or alternator.
These are the three pieces of tin that go on the back of the generator or alternator. Install the flat backing plate on first with the hole down. Then place the small ring on top of that and then the last piece with the vent facing down. When you install the generator into the fan shroud, the wiring posts should be at 2 o'clock. For alternator or 30 amp 12v generators only.
Bug (Type 1): 1500-1600
Bus (Type 2): 1500-1600
Ghia: 1500-1600
Thing: 1500-1600
Race/Off-Road: 1500-1600
No customer reviews for the moment.
Part #: 111937205
Fuse Box, 4 Fuse
Application:Part #: 2711101
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: 1863620CS
Center Console Basket (Small) Chrome
Application:Part #: 211611775C
This flex hose goes from the metal brake line on the rear fork to the metal brake line on the axle tube.
Application:Part #: F1002
These are the glues and oils we use..
Application:Part #: 251201075AD
Fuel Tank 70mm Filler with Metal Fill Pipe
Application:Part #: 113501535A
This bolt holds the rear suspension control arm to the car.
Application:Part #: 141871030
This is the outer skin on your convertible.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113857113
Clip for Ash Tray, 2 Required
Application:Part #: 211941073
Back up Assembly with Clear Lens, Each
Application:Part #: 131405671
Spindle Nuts pair Left & Right
Application:Part #: 111857101K
Glove Box, made of Paperboard like OE style
Application:Part #: 1411298
Stainless Steel Clamps Only, Link pin/ Ball Joint
Application:Part #: 133807332A
Right rear bumper shock
Application:Part #: 311109601
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
Application:
These are the three pieces of tin that go on the back of the generator or alternator.
