Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Dimmer Switch Screws, Mounts dimmer switch to vehicle, Pair
Dimmer Switch Screws, Mounts dimmer switch to vehicle, Pair
Bug (Type 1): -65
Bus (Type 2): -65
No customer reviews for the moment.
Part #: 211867765AGY
Grey Rubber Mats mount Underneath seat and extends under Front Floor Mat
Application:Part #: 113415821
These are the ball joints on the tie rods.
Application:Part #: 111955408B
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 61151062C
Clamps for Engine Oil Accumulator 2 QT capacity
Application:Part #: 6251005
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 3881214
We really like the style and comfort that these seats provide.
Application:Part #: 211845501A
Rear Window Glass Deluxe
Application:Part #: 211615107
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 6707303
These bumpers are made for Baja Bugs.
Application:Part #: 151871182B
These cover the hinges in the back by the rear seat..
Application:Part #: 251405645B
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211498041BR
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam.
Application:Part #: 1109602
Valve seats are used in the big valve heads.
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: T1301101
Pinion Nut Socket
Application:
Dimmer Switch Screws, Mounts dimmer switch to vehicle, Pair
