Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard. So, here's the answer. Put lowered spindles on your bug or bus and it will ride like it did stock. The bug spindles come with a 2 1/2" drop and the bus with a 3 1/2" drop. On the king and link bug spindles you can get spindles only or have us install the king and link pins. Those of you with 66, 67 bugs will have to change the outer tie rod end to 68 and later. On the bus spindles they only come with the king pins rebuilt. Also on the bus spindles you will need a tie rod with ends from a 1968-1979 (part number 211 415 801F). This is necessary to give more frame clearance. These spindes are cast not welded. Sold in pairs and some on an exchange basis.
Bug (Type 1): 66-
Ghia: 66-74
No customer reviews for the moment.
Part #: 113611399
Brake Fluid Reservoir Pad
Application:Part #: 111405661
Wheel Bearing Thrust Washer
Application:Part #: 61316
These stock pumps pump fuel into the carburetor.
Application:Part #: 1905531BL
This ignition system eliminates points, rotor, condenser and even the cap.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 261867501
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 253070703
Replacement canvas for your camper.
Application:Part #: 211415802D
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 241885000
Rear Seat Support Bar, Clamps and bar
Application:Part #: NGK D7EA
This Spark plug is only used for Racing or Competition vehicles due to the size of the Spark Plug; Dimensions Below Thread Pitch: 12mm x 1.25mm, Thread Length: 19mm (3/4") Verify that the Thread Pitch and length is compatible with your heads if you have any questions call and ask prior to ordering.
Application:Part #: 111863157
Wire Harness Clip, Each
Application:Part #: 1129505115
These are some of the most common jets used. Sold in Pairs
Application:Part #: 1601130CH
Open end Aluminum Lug Nuts, 12 point, 14mm-1.5, Chrome
Application:Part #: 113707904
This bracket holds the license plate to the car.
Application:
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.