Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These cables set the rear brakes.
These cables set the rear brakes. When installing the new cables use white grease on them. Make sure you have adjusted your rear shoes before tightening the cables.
No customer reviews for the moment.
Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application:Part #: 1405311A
Do you have a lowered beam now? They should have come with a kidney belt and a mouth guard.
Application:Part #: 151871182C
These cover the hinges in the back by the rear seat..
Application:Part #: 211881283
Bus Seat Pivot Bolt
Application:Part #: 111885355
Rear Seat Backrest Panel
Application:Part #: 111881375
This is the padding that sits on top of the springs of the seat. DOES NOT COME WITH HEADREST. See part number 111881375H for head rest.
Application:Part #: 111951111H
This little unit goes beep-beep.
Application:Part #: N171214
These are some of the fuses and bulbs that you might need.
Application:Part #: 113863700
These rubber mats go on the front and rear floors.
Application:Part #: 1109032
Engle Cams TCS-30 (Turbo Applications only)
Application:Part #: 7105401CU
We’ve teamed up with Neil & Parks to create a new Rod & Cap option for anyone running a Pauter “Big Block VW”. The Aluminum rod is made by MGP, and we are custom cutting the rod and cap to achieve a self-centering “cracking” application. These caps clear everything in a Pauter block.
Application:Part #: 1301103
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: 113919049C
The sending unit registers the fuel level on the gauge.
Application:Part #: 1127109
This is a brass tee for dual carbs.
Application:Part #: 211611070BR
This hydraulic slave cylinder is found in the front brake backing plate.
Application:Part #: 070199231GR
Inner engine mount.
Application:
These cables set the rear brakes.
