Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Mesa coolers are the state of the art oil coolers.
Mesa coolers are the state of the art oil coolers. They're the strongest oil cooler on the market. Manufactured from aircraft quality aluminum, the fluxless, oven brazed construction provides excellent strength and vibration resistance. In fact, they're so strong that you can stand on them without damaging them. The biggest problem with tube style oil coolers is that the oil passes through one tube, with a series of fins crimped onto it. Cooling is achieved by the heat transferring from the oil to the tube, then onto the fins and finally to the air. Problems occur because only a very small portion of the fin is in contact with the tube, so heat loss is minimal. In the Mesa design, depending on cooler size, oil passes within an embossed plate and travels along as many as sixteen different paths. This method spreads the oil across the whole surface area of the plate. In turn, this plate is exposed directly to the air, so the heat loss is from the oil to the air. We use this product a lot and recommend the 72 plate coolers on the Bugs and Type 3's. A 96 plate on a Bus. Off road cars take your pick. Never mount the cooler in front of the engine intake fan.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117024FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 311115107AK
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: N138171
Oil pressure relief gasket
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115457RD
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Red
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115107BHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117105ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115183RD
This plate is made out of a solid piece of aluminum. Red
Application: