Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the bearings and brushes for your generator.
These are the bearings and brushes for your generator. Replacing bearings will require you to take the generator apart, so pay close attention to where all the parts go. The brushes can be replaced with the generator still on the Car. The bottom brush is tricky, so lay a rag under the opening in case you drop the screw.
Bug (Type 1): -66
Bus (Type 2): -66
Type 3: -66
Ghia: -66
Race/Off-Road: -66
No customer reviews for the moment.
Part #: 113903515
These are the bearings and brushes for your generator.
Application:Part #: 30019
This little box tells the generator what to do.
Application:Part #: 1903109BOBL
Billet Pulley Outer Half Blue
Application:Part #: 1903141
This chrome strap holds the alternator or generator to the stand.
Application:Part #: 111119123A
Cooling Fan Hub
Application:Part #: 1903531
On all upright motor, this plastic cover goes over the top opening of the generator to keep dirt out.
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: 1903109BORD
Billet Pulley Outer Half Red
Application:Part #: JC86030
Jaycee Billet Alternator Pulley, Silver
Application:Part #: 111903181
Generator Pulley Nut
Application:Part #: 111903131A
Probably the most common cause of generator pulleys coming apart is the shortage of shims.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 043903109BR
This is the pulley on the generator that holds the belt.
Application:Part #: 1301104
This bushing is made to mate mismatched bellhousing and starter combinations.
Application:Part #: 211903183
This is the bell shaped spacer that hold the outer half of the generator pulley on.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:
These are the bearings and brushes for your generator.