Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a little rubber pad that goes on the front beam where you attach the beam to the body.
This is a little rubber pad that goes on the front beam where you attach the beam to the body. They are located under the gas tank (except Bugs-58). You will need to put them on the two threaded nuts that are part of the beam, then mount the beam. Put the other two pads on from the gas tank side and then the plates and bolts. One pair does one side, you will need to order two pairs for the car.
Bug (Type 1): All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: N141174
Rear Side Marker Lens Mounting Screws, License light lens Screws, Sold as a Pair
Application:Part #: N127051
This is the pulley on the generator that holds the belt.
Application:Part #: 151871357C
This seals the top to the window(s).
Application:Part #: 113105401ACO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 186361211
These ride on the tunnel from the shifter forward.
Application:Part #: 1800100F
This is a copy of the original EMPI license plate frame made years ago.
Application:Part #: 113863712
This is a full carpet kit.
Application:Part #: 2101474
These bolt on valve covers are for the pancake style engine.
Application:Part #: 111255483
These are the vents that clip into the dash.
Application:Part #: 1198026A
This kit contains a quality urethane bushing, a clutch return spring and retaining clips needed to install the throw-out bearing arm in the transmission.
Application:Part #: 1711176INS
Replacement inserts for Urethane Shift Rod Couplers
Application:Part #: 311401301C
Lower Outer Needle Bearing For Front Beam (2 required)
Application:Part #: 211801371A
A floor support section.
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 211809164BX
Rear Wheel Well Arch, Right
Application:Part #: 151883408
Like the door panels, seat covers are a long subject; so here's the basics.
Application:
This is a little rubber pad that goes on the front beam where you attach the beam to the body.