Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These rubber mats go on the front and rear floors.
These rubber mats go on the front and rear floors. We suggest you do some rust prevention to the floors before laying the mats down.
Bug (Type 1): 68-72, SB, 71-72
No customer reviews for the moment.
Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 261881370
This is the padding that sits on top of the springs of the seat.
Application:Part #: 6801142
Stainless Steel Line Clamp 1/4" Line, Set of 4
Application:Part #: 113853505H
This is the front strip that goes down the front hood.
Application:Part #: 113863509C
Front Trunk Liner
Application:Part #: 1971226
We highly recomend using the positive termanial cover, as it can keep the termanial from hitting the rear seat spings and shorting out the battery.
Application:Part #: 113798053A
This is what gets smashed up first in an accident.
Application:Part #: 1903183
This aftermarket chrome cap nut and spacer hold the alternator/generator pulley on.
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 1615109IRS
This kit allows you to run disc brakes in the rear.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 1109406
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 113905250
This clamp goes around the distributor.
Application:Part #: 112711155
This is a replacement shift rod.
Application:Part #: 113857059
Trim around Fan Switch
Application: