Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seal goes in the headlight buckets. The inner one is fun to put on as it needs to be stretched around the glass. It goes on the opposite way you would think it goes on. The two lips on the seal face out.
Bug (Type 1): -66
Bus (Type 2): -67
No customer reviews for the moment.
Part #: 261801804
Inner Post For Side Panel, Full Height
Application:Part #: 113847129BWH
This little plastic cover goes around the hinge on the rear corner window popout..
Application:Part #: N177512
These are some of the fuses and bulbs that you might need.
Application:Part #: 133415303
These two rods go from the center tie rod on a Bug, to the spindles, making the car turn.
Application:Part #: 1117105ALM
These fittings are used for the stainless steel hose.
Application:Part #: 2251205
Muffler Flange Gasket (Pair)
Application:Part #: 111698471
This kit comes with the o-rings and dust seals to repair your calipers.
Application:Part #: 1411300D
These heavy duty sway bars help eliminate swaying.
Application:Part #: 133877305
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 211201119
This is part of the filler neck..
Application:Part #: VDO240855
This T-adapter is needed to hook up the oil pressure and oil temperature gauges.
Application:Part #: 311501615F
The rear wheel attaches to the rear brake drum.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 261827711C
It seals the engine lid to keep the air that is forced through the side vents from being sucked out the back and making it go through the fan where it is most needed..
Application:Part #: 6105256BK
Sand Seal Pulley Kit, Includes Aluminum Collar and Orange Seal
Application:Part #: 131711741A
Heater Control Knob, Red
Application:
