Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit contains all of the gaskets needed to rebuild a transmission. If you don't have the correct transmission jigs, don't try to rebuild the transmission yourself.
Bus (Type 2): 76-79
No customer reviews for the moment.
Part #: 211501293A
This nut goes on the inner side of the lower axle shaft of your large nut (46mm) recution boxes.
Application:Part #: 002301241A
This plastic ball goes in the nose cone of a 68-79 bus transmission.
Application:Part #: 091301189A
Transmission to drive flange seal. Left or right
Application:Part #: 113301263
These rubber mounts hold the transmission in place.
Application:Part #: 211301265A
These rubber mounts hold the transmission in place.
Application:Part #: 113311123A
This is the main culprit of a noisy transmission.
Application:Part #: 111398003
Transmission gasket set.
Application:Bug (Type 1); -60
Bus (Type 2); -59
Ghia; -60
Part #: 111301255A
Transmission Cradle Mount Bracket
Application:Part #: 111398005A
This kit contains all of the gaskets needed to rebuild a transmission.
Application:Part #: 111301257
Transmission Horn Bolt
Application:Part #: 002301189C
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 113301229A
This is the front of the transmission that houses the shift lever.
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 211301297
Front Transmission Mount
Application:Part #: 2301150
This is a bolt on kit that reduces torsional stress felt at the front of the nose cone mount and rotational stress on the bell housing mounts.
Application:Bus (Type 2); 56-67