Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This small fan shroud came on the 36hp motor.
This small fan shroud came on the 36hp motor. The nice thing about this shroud is that it gives you more room around dual carberators. This shroud is okay, but we prefer the doghouse shroud, because it's a better cooling system. Also the stock internal oil cooler does not fit in this shroud.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Thing: 40hp-1600
Ghia: 40hp-1600
Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119026BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: N115244
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1119302BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119317CH
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119528BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1117323
Hoover Bit
Application:Bug (Type 1); 1600
Bus (Type 2); 1600
KG; 1600
Thing; 1600
Offroad/race car; 1600
Part #: 1119028BK
This small fan shroud came on the 36hp motor.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 1119517BK
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1119526CH
This tin goes from one piece of cylinder tin to the other.
Application:
This small fan shroud came on the 36hp motor.
