Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
It's really a bolt, but that's what everybody calls it.
It's really a bolt, but that's what everybody calls it. This bolt holds the flywheel on. If you are using an old one make sure the needle bearings in the pilot bearing are still in the end and that it's not rusted. Note: This bolt should be put on with a torque wrench and not a breaker bar with someone jumping off the roof. Impact guns are out too! Torque the bolt to 250 ft. lb., anything less and it will come loose. Anything more and you run the risk of cracking the bolt and having the flywheel fall off.
Bug (Type 1): 61-79
Bus (Type 2): 60-71
Type 3: 62-73
Ghia: 61-74
Race/Off-Road: 61-79
No customer reviews for the moment.
Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113105271BCO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105287
Flywheel Shim 25-36HP, .34mm (0.0135")
Application:Part #: 311105273ACO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 111105401CO
Most people don't realize that these are one of the most important parts in the motor.
Application:Part #: 1105279
This gasket is only used if you're having problems with your end play.
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 1105255BK
This is a very nice pulley; the numbers are etched in and do not wear off.
Application:Part #: 311105101F
New 1600 Crankshaft
Application:Part #: 111105235A
These are the shims that set the endplay of the distributor drive gear.
Application:Part #: 111105283
Flywheel Shim 25-36HP, .30mm (0.012")
Application:Part #: 111105713A
Rod Bearings .20
Application:Part #: JC86040
Jaycee Billet 7" Crank Pulley for Street Cars, Red
Application:Part #: 1105305R
This is a large thrust surfaced gland nut made out of chromoly.
Application:
It's really a bolt, but that's what everybody calls it.
