Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Valve seats are used in the big valve heads.
Valve seats are used in the big valve heads. So if you have big valve heads and need to replace the valve seats, this is what you will need. If you are planning on building your own big valve heads, we suggest you price out all the part first, complete heads are usually cheaper.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1198092A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198161
These rings are cast iron.
Application:Part #: 1198087
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198090B
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:Part #: 1198083
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 1198159
These rings are cast iron.
Application:Part #: 111198157B
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 111198057
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1101462KIT
This kit has the correct nuts and washers to hold the heads on the engine..
Application:Part #: 1198163
These rings are cast iron.
Application:Part #: 021101457
These nuts and washers hold the heads on.
Application:Part #: 070198169
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 113101353ECO
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:
Valve seats are used in the big valve heads.
