Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel.
No customer reviews for the moment.
Part #: 1411298C
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Application:Part #: N127071
Steering Wheel To Steering Shaft Retaining Key Bus (Type 2): -67
Application:Part #: 113141165B
Also known as a throw-out bearing, this bearing's function is to disengage the clutch.
Application:Part #: 1601102
These are studs and nuts for different types of wheels.
Application:Part #: 00061
This is a direct replacement coil for the 1983-91 Vanagons.
Application:Part #: N120091
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 113101353BRB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 1127911S
EMPI Tall Manifolds for 48/51 EPC/IDA Pair
Application:Part #: 211415049BWG
If you have a lot of play in the steering don't just assume the steering box is bad.******Due to the lack of cores that we have to rebuild, we require the core to be sent up front before we will send out a rebuilt box***
Application:Part #: 113105231B
This gear matches up with the brass gear that is on the crank.
Application:Part #: 111899119B
Body Pad (2), Rear Shock Tower
Application:Part #: 112950504IDF
Idle Jet O-ring for 40/44 HPMX (EMPI), 40-48 IDF (Weber)
Application:Part #: 361141719HD
Clutch Cable Arm Forged for 20mm Cross shaft
Application:Part #: 251819019
Dash Defroster/Heater Blower Fan/Motor
Application:Part #: 231068001A
Westfalia Pop-Top Trim
Application:Part #: 111885553
Rear Seat Backrest Buffer
Application: