Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head. We recommend that you replace them when you have a valve job done. The old valves can get brittle due to the heat and break off. On stainless steel valves, make sure you grind the keepers so that they don't touch each other when put in place. Stainless steel valves are soft and if you don't grind the keepers the valves will eventually pull through.
Bus (Type 2): 74
No customer reviews for the moment.
Part #: 211711195
Shift Rod Guide Tube
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 211405691A
Grease Cap, Left, With Speedo Cable hole
Application:Part #: 141971018
The electrical harness runs everything on the car.
Application:Part #: 211971028FC
Complete Wiring Harness
Application:Part #: 211707001AM
Complete Front Bumper assembly MINUS mounting brackets, coated in primer
Application:Part #: 113611021C
This hydraulic cylinder feeds all the wheel cylinders.
Application:Part #: 1501619
Aluminum Wheel Spacer 1" thick 5x205 bolt pattern (Pair)
Application:Part #: 1601124CH
Aluminum Porsche Style Alloy Lug Nuts, Set of 5, M14-1.5 x 1 1/4" thread
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113701173
This bracket is part of the torsion housing.
Application:Part #: 025198012A
Cylinder Head Gasket Set (1 side)
Application:Part #: 133609721
These cables set the rear brakes.
Application:Part #: 113863404
This is a full carpet kit.
Application:Part #: 211415802F
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
