Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements.
Bug (Type 1): 66-
Ghia: 66-
Thing: 73-74
Race/Off-Road: 66-
No customer reviews for the moment.
Part #: 211847515WG
This latch screws onto the safari window latching it closed.
Application:Part #: 111511245E
This rubber "donut" goes around the spring plate, allowing it to move up and down.
Application:Part #: 1847491HSK
These kits are designed to replace the straight slide supports on Bug front Safaris and large & medium rear Bus Safaris
Application:Part #: 211843642ABK
Inside side door handle
Application:Part #: 111405691B
This is the cap that goes on the outside of the drum; covering up your bearing.
Application:Part #: 4885401CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1141026
We only offer brand new pressure plates because so-called rebuilt pressure plates never quite come up to factory pressure specs.
Application:Part #: 211837501
This is the mechanism that makes the window go up and down.
Application:Part #: 251845521CA
This seal is for the rear window.
Application:Part #: 151845521AAM
This seal is for the rear window. This is for a CONVERTIBLE ONLY.
Application:Part #: 131853535
This is the chrome trim that went on the front and sides of the Bug to dress it up.
Application:Part #: 151871410
These seal the base of the rear quarter windows on early convertibles..
Application:Part #: 113821021M
These new front fenders are not as thick as the original German fenders.
Application:Part #: 6201073
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 029256251A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..