Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements.
Bug (Type 1): -65
Ghia: -65
Race/Off-Road: -65
No customer reviews for the moment.
Part #: 153871373A
This is a sleeve that goes in the front window frame for the guide pins to sit in.
Application:Part #: 113953162B
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 113837205B
These are the front door handles.
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 111801045D
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 1898122
These window seals don't have the groove in them for the chrome trim, giving the car the Cal Look.
Application:Part #: GR15NC
Generators supply the battery with voltage.
Application:Part #: 6707303KT
These bumpers are made for Baja Bugs.
Application:Part #: 211501357
Torque plate
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 251807311D
Chrome Rear Bumper for Vanagons
Application:Part #: 1711106
Short trigger reverse lock out shifter.
Application:Part #: 113129909
This is the clip for the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 113837640A
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..