Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These fittings are used for the stainless steel hose.
These fittings are used for the stainless steel hose. Keep in mind there will be two fittings per connection. On the pipe thread end use teflon tape and don't "muscle" them. Turn them as tight as you can by hand, then one more full turn with a wrench.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115449OIL
Replacement Oil Cap Billet "OIL"
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: 1117107
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 111115111B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: JC22970
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Red
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:
These fittings are used for the stainless steel hose.
