Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber. These don't normally need to be replaced unless they have been ground too far or too many times. On stainless steel valves, make sure you grind the keepers so that they don't touch each other when they're put in place. Stainless steel valves are soft and if you don't grind the keepers they will eventually pull through.
Bus (Type 2): 72-73, 75
Vanagon: 80-83
No customer reviews for the moment.
Part #: 111809085CC
Rear Shock Tower Area
Application:Part #: 71016
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 111405627
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 1101475BL
These are just stock valve covers that are chrome.
Application:Part #: 111711501A
Choke Cable w/Sleeve and knurled nut
Application:Part #: 3129034E
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 62010718E5
End Fill 8x24" Polished Stainless Steel Gas Tank
Application:Part #: 131405615AGR
These are the front drums that the brake shoes ride on.
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: JC21020
Jaycee Mag-Plate, 6 Bolt, Black
Application:Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 113857553
Mount Rod for Right Visor
Application:Part #: 111863341
Black Emergency Brake Boot
Application:Part #: 1615106A
Replacement Rear Brake Rotor 5x130,m 5x4.75"; for 1615112
Application:Part #: N144111
Some of the most common studs you might need.
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:
The two inside valves in the head are the intake valves, which let the gas into the combustion chamber.