Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These cylinder head tins sit under the fan shroud.
These cylinder head tins sit under the fan shroud. They're not great, but they'll work with some custom fitting. Sold in pairs.
No customer reviews for the moment.
Part #: 1119528CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119533CH
This tin goes behind the crank pulley.
Application:Part #: 1119303BK
These cylinder head tins sit under the fan shroud.
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 1119525BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119431BK
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 1119025CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 1119516CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119527CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1903031CH
This is one of the three-pieces of the Alternator or Generator Tin Set, it's the large flat plate that is seen.
Application:Part #: 131119357
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:
These cylinder head tins sit under the fan shroud.
