Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the barrel lock that locks the cable to the carb. It is also used on the Heater Cables
This is the barrel lock that locks the cable to the carb. They really don't go bad, they just seem to walk away. They are also used on the heater cables.
No customer reviews for the moment.
Part #: 2301241
This steel ball replaces the factory plastic one in Bus trannies 1968-1979.
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 6115467BK
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 6517283002
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: 111819189B
Heater Vent, Plastic, LH
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 113119031B
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 211201075M
Fuel Tank. This tank can be used with non fuel injected busses, you just need to plug the injection return line.
Application:Part #: 231070709
This seal goes around the stationary luggage rack of campers..
Application:Part #: 111837475
The front door window rolls up and down between these two rubber seals.
Application:Part #: 151819189A
Heater Vent, Plastic, Convertible
Application:Part #: 113945242A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 111881281
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 113611801A
Brake fluid reservoir to Steel Line Hose
Application:Part #: 2251205
Muffler Flange Gasket (Pair)
Application:
This is the barrel lock that locks the cable to the carb. It is also used on the Heater Cables
