Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the glues and oils we use..
These are the glues and oils we use.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia (Type 4): All
Thing (Type 5): All
Race/Off-Road: All
No customer reviews for the moment.
Part #: ECX44
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 111201551AL
Locking Gas Cap
Application:Part #: 111198005
This kit contains most of the seals and gaskets necessary to rebuild an engine.
Application:Part #: 113853535BSL
Body Molding Kit
Application:Part #: 111701263
This bushing wraps around the front shift rod.
Application:Part #: 6012904B
This pole has a light on the top of it, just above the flag.
Application:Part #: 113127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 6823564
There are two types of hold downs, rubber and steel.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: WG310012
2 1/16" Oil temp gauge with sending unit. AVAILABLE NOW.
Application:Part #: 111881375
This is the padding that sits on top of the springs of the seat. DOES NOT COME WITH HEADREST. See part number 111881375H for head rest.
Application:Part #: N141341
These are the rear lenses for the tail light, brake light and turn signal light. Set of 4 Screws for 62-67 Bug taillight lens and 68-72 Bus front turn signal lens to body
Application:Part #: 6823504A
These fasteners take some time to put in, but they're worth the effort. Long Stud
Application:Part #: N115271
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: 1823565
This guard goes underneath the front hood handle to prevent your fingernails from scratching the paint..
Application:Part #: 211499131
Lock Plate, Axle Beam to Body, 8 Required
Application:
These are the glues and oils we use..