Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These gaskets are used on the sump plates of the engine.
These gaskets are used on the sump plates of the engine. Note: We use a sealer called Gasgacinch on these gaskets. You should use cap nuts on the studs and DO NOT over tighten them.
Bug (Type 1): 61-79
Bus (Type 2): 60-71
Type 3: 62-73
Ghia: 61-74
Thing: 73-74
Race/Off-Road: 61-79
No customer reviews for the moment.
Part #: 6115349
If you built your motor out of a type 3 case, you probably notice that once you got it all together you're missing a dipstick tube.
Application:Part #: 111115475A
Oil Filler Seal, 25-36 HP
Application:Part #: 1115449RD
Replacement Oil Cap Billet Red
Application:Part #: 111115451
This rubber collar goes around the dump tube that comes from the generator stand.
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115110
These thermostats turn your electric fan on automatically.
Application:Part #: 1117021
Mesa coolers are the state of the art oil coolers.
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1117104ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1117007
This is the high-temp/pressure hose used for routing oil to coolers and filters.
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 111115175
Oil Screen 25HP engines thru 1 677 687
Application:Part #: 040101149
Oil pick up Pipe
Application:
These gaskets are used on the sump plates of the engine.