Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes. If you are replacing your brake shoes, make sure you take these out and clean them up. Grease the threads of the screw and the side of the star where it goes into the backing plate. Anti-Seize works really well.
No customer reviews for the moment.
Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:Part #: 1501612
We make wheel adapters for some of the more common drums and wheels.
Application:Part #: 1867169
If you don't want arm rests on your door panels or don't like pulling the door closed with them, then this is the way to go.
Application:Part #: 151847325A
Hinge Pin For Quarter window, Convertible
Application:Part #: 111721529A
Accelerator Pedal Pin Kit
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 211609701T
These cables set the rear brakes.
Application:Part #: 211411033E
Front torsion springs
Application:Part #: 6119024
This is a billet mount made to relocate your coil.
Application:Part #: 141707353
These are miscellaneous seals that fit bumpers, For more seals related to bumpers see Bumper Gromments..
Application:Part #: 1601120
These protect your mags from theft.
Application:Part #: 6B03010BK
These boots are made to keep water and dirt out of distributor and coil.
Application:Part #: 111863703
This is a full carpet kit.
Application:Part #: 1105253BL
This is a crank pulley for an upright motor.
Application:Part #: 1115464
This air filter is made to protect the crankcase.
Application:
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.