Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a brand new axle beam with adjusters already installed.
This is a brand new axle beam with adjusters already installed. Adjustment is achieved by moving the center block. Note: The farther you adjust it down, the rougher the ride.
Bug (Type 1): 66-79
Ghia: 66-79
Thing: 73-74
Race: 66-79
No customer reviews for the moment.
Part #: 151701061M
Floor Plate, Left, Convertible only
Application:Part #: 111405692B
Front Bearing Grease Cap
Application:Part #: 1615113
Deluxe Zero Off-set 5x205 Rear Disc Brake Kit with E-Brake, 1968 IRS and Swing Axles, Cast Brackets
Application:Part #: 211611805E
Brake fluid tube
Application:Part #: 211841529
Cargo Door Hinge Plug, 8 for passenger, 4 for Double cab
Application:Part #: 211498101
The main reason to replace these clamps is because you've destroyed the old ones getting them off.
Application:Part #: 111971110
The electrical harness runs everything on the car.
Application:Part #: 2885805CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: N103483
This is a list of the most common bolts used on a car..
Application:Part #: 028129087A
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 211703609B
Pedal Assembly Cover Plate
Application:Part #: 1101446
This is a shim that is used between the head and barrel.
Application:Part #: 070903137
This is the belt that turns the generator.
Application:Part #: 151857611A
This is a strap, not a handle.
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 6415811A
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 LH
Application:
This is a brand new axle beam with adjusters already installed.