Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This valve in the wheel cylinder allows you to bleed the brakes.
This valve in the wheel cylinder allows you to bleed the brakes. If the bleeder valve has broken off, we've found it's easier to replace the whole wheel cylinder because you usually ruin the cylinder before you get the valve out. 6x28mm
No customer reviews for the moment.
Part #: 4885401CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 211971113
The electrical harness runs everything on the car.
Application:Part #: 68012024
Set of 4 Universal Mounting Tabs with 3/8" hole
Application:Part #: 111837640BHD
These locks keep the vent wing closed, therefore a must, but they're a pain to replace.
Application:Part #: 113919049C
The sending unit registers the fuel level on the gauge.
Application:Part #: 6251010
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 211817211
This is the flat seal for the air duct on buses 1955-1967.
Application:Part #: 311953513B
This switch tells the flasher which way to send the current.
Application:Part #: 1707155
These are the guards on the front and rear bumpers.
Application:Part #: 2301241
This steel ball replaces the factory plastic one in Bus trannies 1968-1979.
Application:Part #: 2711104
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 111721219
Brake Pushrod to Pedal Pin
Application:Part #: 211698001A
Metal Brake Line Kit
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 211609632B
E-Brake Push Bar, Right
Application:
This valve in the wheel cylinder allows you to bleed the brakes.
