Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This valve in the wheel cylinder allows you to bleed the brakes.
This valve in the wheel cylinder allows you to bleed the brakes. If the bleeder valve has broken off, we've found it's easier to replace the whole wheel cylinder because you usually ruin the cylinder before you get the valve out. A slick trick with these as well is to place them on your grease zerts to keep the dirt out.
No customer reviews for the moment.
Part #: 0251251171AD
Exhaust pipe 1&3 side
Application:Vanagon; 86-92, 2.1, 2WD
Part #: 151871449EM
Convertible Rear Window Metal Frame only
Application:Part #: 001301209
Nose Cone Bushing, Front, Late
Application:Part #: 251837211
This seal goes between the handle and the body.
Application:Part #: SRHT6V
A 6volt gear that fits the high torque starter.
Application:Part #: F1380
These are the glues and oils we use..
Application:Part #: 211937037
This is a replacement fuse box.
Application:Part #: 311141025E
The clutch cover is also known as a pressure plate.
Application:Part #: 151847351
These are wedge to seal the coners on the front door and quarter windows, where the metal frames meet the scrapers.
Application:Part #: 211915405
Battery Cover 12 volt applications
Application:Part #: 152823509B
The hood catch is what the pin of the hood latch goes into.
Application:Part #: 211707111B
Front Bumper Center Section Only, Primer finish
Application:Part #: 1105256BK
Standard Size Pulley w/ Bolt On Sand Seal Kit
Application:Part #: 2601031
Fuchs Matte Black/Matte Silver, 5x112, 5.5"x15"
Application:Part #: 1707135ACH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:
This valve in the wheel cylinder allows you to bleed the brakes.
