Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These gears give just a hair more horsepower.
These gears give just a hair more horsepower. The only real difference you'll notice is the noise they create. They're a great idea if you are going for the "Friday-Saturday night" car, but if your car is a daily driver and you want to hear the stereo, don't use them.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1109430
These shims are used under the rockers to set the geometry.
Application:Part #: 111109345
Push Rod tube seal for 36 HP
Application:Part #: 1109302
These push rods are made out of chromoly steel and do not expand at the same rate as aluminum.
Application:Part #: 1109305
Aluminum Smith Bros. Push Rods
Application:Part #: 111109611A
Exhaust Valve 36 HP
Application:Part #: 1109341OR
Replacement O-Ring Set 16 pieces
Application:Part #: 1109405
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 1109605
Stainless steel valves are used in the big valve heads.
Application:Part #: 1109310
These lifters are made by Engle and have a small hole in the end of them that allows oil to be pumped onto the cam lobe and lifter face.
Application:Part #: 1109410
These shims are used with the Solid Shaft Rocker Kit.
Application:Part #: 1109603
Stainless steel valves are used in the big valve heads.
Application:Part #: 1109651
We have had good luck with stock keepers on single springs.
Application:Part #: 113109651A
These springs return the valves back to their seats.
Application:Part #: 113109641B
These springs return the valves back to their seats.
Application:Part #: 113109612
The two outside valves in the head are the exhaust valves, they let the burned fuel out of the head.
Application:Part #: 111109335
These tubes go from the case to the heads to house the push rods.
Application:
These gears give just a hair more horsepower.
