Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These seals go around the arms to keep the dirt out of the front beam. Used seals are fine as long as they are pliable and not cracked.
Bus (Type 2): 55-67
No customer reviews for the moment.
Part #: 111198553
Fuel pump rear for 40hp repair kit.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
Ghia: 40hp
Part #: 1611750C
These stainless steel braided flex lines don't swell like the original rubber hoses and they make the undercarriage look a lot nicer.
Application:Part #: 111698003
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 211511245
This rubber "donut" goes around the spring plate, allowing it to move up and down.
Application:Part #: 113707133A
These brackets hold the bumpers on.
Application:Part #: 070115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 67215569
These are heavy, heavy duty cables.
Application:Part #: N125221
These are some of the more common cotter pins.
Application:Part #: 221847673A
This is the seal that goes around the vent wing seal that is in the middle or the rear side of your bus.
Application:Part #: 6721356C
Slave Cylinder Trans Bracket Billet for Type 2 Transmissions
Application:Part #: 111821021P
These new front fenders are not as thick as the original German fenders.
Application:Part #: 171837485
These clips hold the scraper in on the front doors.
Application:Part #: 113721221
Brake Pedal Push-Rod Lock Tab
Application:Part #: 151837289
Door Alignment Wedge Plate, Convertible only
Application:Part #: 241853547
These are the clips that hold the various chrome moldings on.
Application:Part #: 1109406
These shims are used with the Solid Shaft Rocker Kit.
Application: