Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These heavy duty gear keys are rated at twice the strength of stock keys.
These heavy duty gear keys are rated at twice the strength of stock keys. Your transmission will have to come apart to put the keys in, so we suggest you have someone who knows transmissions install them.
Bug (Type 1): -72
Bus (Type 2): T2,-75
Type 3: T3, -72
Ghia: KG,-72
Thing: All
Offroad: -72
No customer reviews for the moment.
Part #: 1301266
Trans Axle Adapter Kit
Application:Part #: 113301263C
These rubber mounts hold the transmission in place.
Application:Part #: 311301265A
These rubber mounts hold the transmission in place.
Application:Part #: 1301051
High performance street cars or off road cars have been known to crack stock transmission cases.
Application:Part #: 113517289A
These are the seals that go around the final drives on an IRS transmission.
Application:Part #: 1301265L
Urethane Front Transmission mount with Hardware
Application:Part #: 111301207
Nose Cone Bushing, Front or Rear, Early
Application:Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1301185
This heavy duty side plate keeps the ring and pinion where it's supposed to be.
Application:Part #: 1301150
Bolt on Center Transmission mount, Urethane stops included
Application:Part #: 113301264
These rubber mounts hold the transmission in place.
Application:Part #: 111301289B
This boot goes around the nose cone to seal up the hole where it comes through the pan.
Application:Part #: 1311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 001301083
This seal keeps the fluid in the converter.
Application:Part #: 111301155
This is the bushing between the bellhousing of the transmission and the starter.
Application:Part #: 001301083B
This seal keeps the fluid in the converter.
Application:
These heavy duty gear keys are rated at twice the strength of stock keys.
