Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
No customer reviews for the moment.
Part #: JC22260
Jaycee Billet Oil Cap with Breater -10 AN Fitting, Black
Application:Part #: 1115107AFF
26mm Oil pump for dual relief case with a flat cam. For full flowed motors only.
Application:Part #: 1115467HO
This is a breather box that will give excess "blow by" a place to go.
Application:Part #: N121051
This is a general rule for washer use, wafer washers are used against aluminum and lock washers are used against steel..
Application:Part #: JC21020
Jaycee Mag-Plate, 6 Bolt, Black
Application:Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115120
Melling Oil Pump for 8mm Studs with Flat Cam Gear
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1117100
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117106
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 043115531A
Oil Filler with Cap
Application:Part #: 021115311
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: JC21010
Jaycee Mag-Plate, 6 Bolt, Red
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117021
Mesa coolers are the state of the art oil coolers.
Application:
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
