Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear Crossmember Left
Rear Crossmember Left
Bug (Type 1): 65-79
Offroad/Race: 65-79
No customer reviews for the moment.
Part #: 211711629A
Heater Cable, OEM length 5735mm(225.79") Stretched
Application:Part #: 211945363A
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 6721071
The pedal plate allows you to use stock VW pedals in your rail style car..
Application:Part #: 62010718C6
Spun aluminum gas tanks for Buggies, come with either end fill or center fill option.
Application:Part #: 6251000
These systems work well with a single carb set up as they have provisions for the heat riser.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 211611764D
Rear "T" Piece to Hose Line
Application:Part #: 09004
The plug wires run from the distributor cap to the spark plugs and coil.
Application:Part #: 113837235AIV
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 133863507D
Front Trunk Liner Upper
Application:Part #: 021105279
The VW Flywheel O-ring Seal installs into the inner flange on the flywheel before the flywheel is bolted to the crankshaft. The flywheel o-ring is often overlooked when replacing the rear main seal.
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 111801046L
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 211817851
Air Distribution Knob Spring Washer
Application:Part #: 1109302
These push rods are made out of chromoly steel and do not expand at the same rate as aluminum.
Application:Part #: 211845121DAM
This seal goes around the front window.
Application:
Rear Crossmember Left