Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This cable operates the carburetor(s).
This cable operates the carburetor(s). You should use white grease on the cable when you install it. We recommend you pack a spare accelerator cable along with your spare clutch cable. If your Bug is a 1958-65 and you are using a roller pedal, use the 2627mm cable.
Vanagon: 83-92
No customer reviews for the moment.
Part #: 311255291A
The heater hose goes from the fan shroud to the heater boxes.
Application:Part #: 133877209
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: 1517120
These diffs add two more spider gears to your differential, plus the housing is way stronger then stock.
Application:Part #: N185301
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 111721507FHD
This is the pedal that works the throttle.
Application:Part #: 6611796
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application:Part #: 6501141
These retainers help stiffen the plates that bolts the tubes to the trans.
Application:Part #: 111857101K
Glove Box, made of Paperboard like OE style
Application:Part #: 111903221A
These are the bearings and brushes for your generator.
Application:Part #: 241853597A
Vent Louver Trim Set, High Polish Stainless Steel
Application:Part #: 6801123
These tabs are used for mounting just about anything to tubing..
Application:Part #: 211953162B
These are the lenses that go over the front turn signal bulb holders.
Application:Part #: 111885371
This is the padding that sits on top of the springs of the seat.
Application:Part #: 113129027
This is what delivers gas and air to the engine.
Application:
This cable operates the carburetor(s).