Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the vinyl covering for the inside roof and sides of the Bug.
This is the vinyl covering for the inside roof and sides of the Bug. We suggest you take it to a professional for installation. The headliner installation is a difficult job and it takes a heat gun to get the wrinkles out. The part numbers are just the basic numbers. We will need to know the color and type of material you want. Please call for pricing. Brought to you proudly by TMI.
Bug (Type 1): 68-72
Off-Road: 68-72
No customer reviews for the moment.
Part #: 181405371WGC
This is the core charge for the Ball Joint arms for the reconditioned arm exchange.
Application:Part #: 133053313
Trim Plate, Radio To Dash
Application:Part #: 151871045C
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 111813705A
This seal goes between the body and the engine.
Application:Part #: APWG170
Good looking shirts with the Wolfgang logo for those cooler nights.
Application:Part #: 141857061
Knee Pad, 2 Pieces Under Dash, Black with Mounting Hardware
Application:Part #: 311251061F
This is the exhaust silencer.
Application:Part #: 1707134R
If you have a 1968 through 1973 bug and want the eariler style bumpers on it, these are the brackets that will get you there..
Application:Part #: 111953042A
This is the whole unit, lens and bulb holder.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 1127468B
Weld-in Male Bung fitting, 6AN
Application:Part #: 6601040
Offroad Wheel, 15"x4", 5x205 bolt pattern
Application:Part #: 113415951B
This is the shaft that connects the steering shaft to the steering box.
Application:Part #: 6703113BLK
The offset hole location of the padding allows it to be positioned to provide more protection where you want it.
Application:Part #: 111971120
The electrical harness runs everything on the car.
Application:
This is the vinyl covering for the inside roof and sides of the Bug.