Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. The Vertical design makes it easier to pour oil into your motor and also comes with a smooth or grooved cap. All are vented. Rubber gaskets in the cap and rubber o-rings for the base seal included.
Bug (Type 1): 401hp-1600
Bus (Type 2): 401hp-1600
Ghia: 401hp-1600
Thing (Type 5): 401hp-1600
Race/Off-Road: 401hp-1600
No customer reviews for the moment.
Part #: 111115107BHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117104
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: N110623
Some of the more common nuts you might need..
Application:Part #: 111115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 111198031
36 HP Oil Change Kit
Application:Part #: 1115610BL
Billet Dipstick, Blue
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 113117021
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 113115193
This is the bolt that goes in the plate on the bottom of the motor.
Application:Part #: 1117111
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22210
Jaycee Billet Oil Cap with Breater #8 AN Fitting, Red
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 111115175B
This screen fits in the sump around the pick up tube.
Application:Part #: 1115110
These thermostats turn your electric fan on automatically.
Application:Part #: 1115485CH
A stock cap that has been chromed for looks..
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
