Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This gasket goes around the fresh air box and seals against the hood.
This gasket goes around the fresh air box and seals against the hood. You should have this gasket because if you don't, when the fresh air box is turned off, the air will go inside the front hood and find it's way through the dash to you.
Bug (Type 1): 68-79; SB,71-72
No customer reviews for the moment.
Part #: 113823355
This is the handle attached to the end of the cable that releases the gas door.
Application:Part #: 113863505B
This is the replacement cardboard liner for under the front hood.
Application:Part #: 113823731B
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 133863507
Front Trunk Liner Upper
Application:Part #: 113863515B
Wiring Cover
Application:Part #: 113863527
Nut for Wiring Cover
Application:Part #: 111701573B
Inspection Cover
Application:Part #: 133863505B
Front Trunk Liner Lower
Application:Part #: 133823731B
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 113863505
This is the replacement cardboard liner for under the front hood.
Application:Part #: 113863509B
Front Trunk Liner
Application:Part #: 1823566
This guard goes underneath the front hood handle to prevent your fingernails from scratching the paint..
Application:Part #: 1863515B
This plastic cover under the front hood, covers up all the wiring.
Application:Part #: 133823719
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 1823319
These replace the stock front hood spring with a gas charged strut.
Application:Part #: 311821335A
Front Apron Plug
Application: