Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Rear Cargo Area Insulation Kit
Rear Cargo Area Insulation Kit 1/2" pad with tar paper layer. Will not fit Convertible models
Bug (Type 1): All except Convertibles
No customer reviews for the moment.
Part #: 1847101RASY
Hinge Assembly Bug Safari Right
Application:Part #: 141871031
This is the outer skin on your convertible.
Application:Part #: 6601156
Polished Aluminum Center Wheel Caps for 5 Lug Rims, Pair
Application:Part #: 133609721
These cables set the rear brakes.
Application:Part #: 1615098A
Right Front Caliper, 5/205 for King and Link Pin Front end
Application:Part #: 251711181
Shift Rod Support Pin for manual Transmissions only
Application:Part #: 113115181A
This is the plate on the bottom of the motor.
Application:Part #: 6615103E
Rear Rotor for Disc brake setup, 5/205 bolt pattern, 12x1.5mm threads
Application:Part #: ECP12Y
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 153863403
This is a full carpet kit.
Application:Part #: 251905855
On the back of the switch, you'll normally see three numbers.
Application:Part #: 131611055GR
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 111201551C
Gas Cap, 80mm with Gasket
Application:Part #: 111298101A
This kit contains a barrel bolt and bracket that hook to the control levers.
Application:Part #: 113707391
This tubular bracket goes on American style bumpers to support the upper tubing of the bumper..
Application:Part #: 111251263A
Heat riser gasket.
Application: