Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Door Lock Mechanism, Left
Door Lock Mechanism, Left
Bug (Type 1): 1968-79 Does not fit 1971-73 Convertible, Will fit 1967 with slight modification
Offroad/Race: 1968-79
No customer reviews for the moment.
Part #: 1698152D
Replacement pads for 1615109A and 1615109B
Application:Part #: 6415812B
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 RH
Application:Part #: 151871204
These are the rear quarter wedges for your convertible..
Application:Part #: 211501357
Torque plate
Application:Part #: 151885372
This is the padding that sits on top of the springs of the seat.
Application:Part #: 113255355C
This is the hose that goes from the body to the engine.
Application:Part #: 113853355CLP
Rear Window Trim Securing Clip
Application:Part #: 2129040
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 113853555C
These are the correct trim moldings for your running boards.
Application:Part #: 113707385W
Rear Bumper Bow, Left, US Style
Application:Part #: 021109317C
These rods link the cam to the valves.
Application:Part #: 113819723
Defrost Hose
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113853535BSL
Body Molding Kit
Application:Part #: 211813356G
Rear Lower Corner, Right, 250mm (9.8") high
Application:
Door Lock Mechanism, Left
