Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Bug (Type 1): 54-67
Bus (Type 2): 55-70
Type 3: 62-65
Ghia: 56-66
Thing: 73-74
No customer reviews for the moment.
Part #: 113857551ABK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 1411297AHD
Have you ever fought the stock sway bar clamps? If you're replacing a sway bar, you might think about these clamps because they're much easier to put on.
Application:Part #: 141857501
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 361845521CCL
This seal is for the rear window.
Application:Part #: 021105401RC
Re-conditioned Piston Rods for 1700-1800cc engines.
Application:Part #: 221845343CAM
These window seals are on buses 1968 on.
Application:Part #: 211703609B
Pedal Assembly Cover Plate
Application:Part #: 211813259B
Engine Lock Catch Plate
Application:Part #: 1101477BL
These covers look good but have a tendency to leak.
Application:Part #: 029198075
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 113837581DCH
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
Application:Part #: 1823731
This seal clips on the hood instead of the body.
Application:Part #: 211813355G
Rear Lower Corner, Left, 250mm (9.8") high
Application:Part #: 113012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
